bed_e.htm, updated: 18 JUN 2010
bed_e.htm, updated: 18 JUN 2010
 View / load down our operating instructions Do you want to know, which type of controller suits your application (best)? Do you want to know, how to use one of our devices? Take a look at our operating instructions! To view them, make use of Adobe Acrobat Reader Version 4.0 or higher! If you do not own this program, download it from Adobe: Get ADOBE Acrobat Reader 
To view the file: click with your left mouse button on the desired instruction. To store the file (... save as): use your right mouse button. Hint: Many operating instructions are valid for a group of software versions or designations (e.g. V6.01...V6.56, V16...V29, mcd... & mcf...) You will find the desired instruction with high probability - All what this page NOT shows is not available or not available in an english version. Before downloading the future or isl-charger instructions please check the software version in your device. Otherwise the downloaded instruction could describe characteristics which are not present in your item. On speed controllers you will find the production date (mm.jj) and the software version (Vxx) on the label below the heat shrinking tube in the right lower edge. On isl 6 chargers the software version is shown at the right end of the display (Vx.yz) (note: this is the position, where the car battery voltage is shown when working) after the car battery is connected. on isl 8 chargers you have to push 3 times the f5 button after the car battery is connected. |
| Select here |
Subject | Date of issue | Bytes about |
| ---------> | Receivers / Transmitter modules |
<------ | ------- |
| wave V 1.00 | wave-series receiver and transmitter modules - loose sheet collection - |
31 OCT 2009 |
1.6M |
| wave V 1.00 book |
wave-series receiver and transmitter modules - book for duplex-printing - |
31 OCT 2009 |
1M |
| S3D-switch-it.GRA | Mounting instructions for Graupner transmitters |
01 OCT 2009 |
210k |
| S3D-switch-it.MPX | Mounting instructions for MPX transmitters |
01 OCT 2009 |
220k |
| S3D-switch-it.FUT | Mounting instructions for Futaba transmitters |
01 OCT 2009 |
100k |
| alpha_point (complete) | FM / PPM Receiver for electric and gas powered models alpha-5.xx / alpha-8.xx - "point series" | 22 SEP 2005 | 480k |
| alpha_point (differences) | alpha-5.xx / alpha-8.xx - "point series" Supplement to the alpha-4/-8 operating instructions. | 10 JUL 2005 | 170k |
| alpha | FM / PPM Receiver for electric and gas powered models alpha-4 / alpha-8 (8-channels) | 23 JUN 2003 | 100k |
| alpha | FM / PPM Receiver for electric and gas powered models alpha-4 / alpha-8 (5+3-channels) | 14 APR 2002 | 100k |
| ---------> | Interface converters/adaptors |
<------ | ------- |
| usb-adaptor-xxxx | USB adaptors for 5 V-SIO and/or alpha receivers |
29 AUG 2007 |
60k |
| ---------> | Charging / discharging devices |
<------ | ------- |
| nextGen.II V1.00 | nextGeneration II outstanding charging and discharging device - loose sheet collection - | 18 JUN 2010 | 500k |
| nextGen.II V1.00 Book | nextGeneration II outstanding charging and discharging device - book for duplex-printing - | 16 MAR 2010 | 500k |
| next-mel | melody module for the nextGeneration charger series | 10 MAR 2008 |
150k |
| nextGen.I V1.50 | nextGeneration I outstanding charging and discharging device - loose sheet collection - | 06 DEC 2008 | 500k |
| nextGen.I V1.50 book | nextGeneration I outstanding charging and discharging device - book for duplex-printing - | 06 DEC 2008 | 500k |
| LiPoProfiBal | Schulze LiPoProfiBalancer. Operating instructions for software version 10. Also valid with restrictions for LiPoBalXX V10. | 22 NOV 2006 | 290 k |
| LiPoBalSup | Schulze LiPoBalancer, Instruction Supplement for Software Version 8 | 22 JUN 2006 | 120 k |
| LiPoBal08/14 | Schulze LiPoBalancer, THE Ultimate Lithium Battery Balancer / Equalizer | 17 JAN 2006 | 250 k |
| LiPoCard2 | Schulze LiPoCard2, the ultimate lithium battery charger with included genuine balancer in a stylish case | 03 MAY 2008 | 600k |
| LiPoCard V10 Up | Schulze LiPoCard, the ultimate lithium battery charger with included genuine balancer | 14 DEC 2005 | 560k |
| LiPoCard up to V6 | Schulze LiPoCard, the ultimate lithium battery charger with included genuine balancer | 19 SEP 2005 | 500k |
| BalCab10/20 | Mounting-/configuration instruction for 10- & 20-pole BalancerCable-Set | 01 DEC 2005 | 280k |
| BalAd-xx | Instructions for configurating the balancing adapters BalAd -Ko4, -TP4, -Ko8, -Ko12, -TP4 | 18 NOV 2008 | 150k |
| isl 8 V 8.50 | isl 8 - high end charging and discharging device software version 8.50 and higher | 27 DEC 2006 | 330k |
| isl 8 V 8.10 | isl 8 - high end charging and discharging device up to software version 8.10 | 05 SEP 2005 | 330k |
| isl 8 V 4 | isl 8 - high end charging and discharging device software version 4.xx | 27 SEP 2000 | 130k |
|
| 
isl 6 V 8 shortform english (45k)
| 
| 
|
| isl 6 V 8.50 | isl 6 - charging / discharging device supplement for V8.41 -> V8.50 | 27 DEC 2006 | 15k |
| isl 6 V 8.41 | isl 6 - charging / discharging device (also for isl 5) up to software version 8.41 | 16 NOV 2005 | 250k |
| isl 6 V 8.11 | isl 6 - charging / discharging device (also for isl 5) up to software version 8.11 | 05 SEP 2005 | 250k |
| isl 6 V 7 | isl 6 - charging / discharging device (also for isl 5) software version 7.xx | 17 DEC 2001 | 150k |
| isl 6 V 6 | isl 6 - charging / discharging device (also for isl 5 and DUO PLUS II) software version 6.xx | 27 NOV 1997 | 170k |
| ecolader | charging / discharging device for rc-cars | 06 MAY 1998 | 400k |
| Service Questionnaire | Covering form sheet for charger repairs | 30 JAN 2004 | 75k |
| ---------> | Switching power supplies for chargers |
<------ | ------- |
| NT-25A | 25 A switching power supply | 06 OCT 2001 | 240k |
| NT-40A2 | 40 A switching power supply | 06 OCT 2001 | 240k |
| ---------> | Speed controllers for brushless motors |
<------ | ------- |
| fut-xxl-40.303 | Additional information about future-xxl-40.303K/WK for firmware version 4 (V4) and higher. |
01 JUN 2010 |
20k |
| future-l, -xl,-xxl | brushless+sensorless speed controller with automatic motor adaption. For firmware version 1 (V1). Single sheets for viewing on the PC |
20 NOV 2009 |
1200k |
| future-l, -xl,-xxl book |
brushless+sensorless speed controller with automatic motor adaption For firmware version 1 (V1). Sorted double sheets for duplex printing and short edge binding |
20 NOV 2009 |
400k |
| future value | brushless+sensorless speed controller with automatic motor adaption. For firmware version 1 (V1). Single sheets for viewing on the PC | 01 JUL 2008 | 1200k |
| future value book | brushless+sensorless speed controller with automatic motor adaption For firmware version 1 (V1). Sorted double sheets for duplex printing and short edge binding | 01 JUL 2008 | 1000k |
| future-u Aerobatic | Additional instruction sheet for the use of the future universal aerobatic programm in the "A" types | 14 NOV 2005 | 15k |
| future "universal" | brushless+sensorless speed controller with DIP-switch from version 10 (V10) | 20 FEB 2009 | 1800k |
| future "universal" | brushless+sensorless speed controller with DIP-switch from V6 (Heli) & V7 (FAI) & future-9.xx | 28 FEB 2003 | 210k |
| future "universal" | brushless+sensorless speed controller with DIP-switch up to V5 (Heli) & V6 (FAI) | 04 MAY 2002 | 150k |
| future "V30 upgrade" | brushless+sensorless speed controller upgrade for all future-b and -H types from 35A. from version 30 upward | 12 JUN 2002 | 130k |
| future "shpa" | brushless+sensorless speed controller with "shpa" versions V 15 to V 29 | 18 NOV 2001 | 140k |
| future "hpa" | brushless+sensorless speed controller with "hpa" versions: V14a, V6...8b, V4w, V6...8i, V6...7L, V5e | 25 NOV 2000 | 250k |
| future (elder) | brushless+sensorless speed controller low voltage up to V13a, V3e, V7f, V4b, V8h, V3i high voltage up to V13c, V9d | 10 MAY 2000 | 400k |
| booster | flat & lightweight "brushless" speed controller | 31 MAR 1999 | 315k |
| mcd99 foreword | Important foreword and warnings to the mcd99 speed controller and governor | 20 JAN 2000 | 50k |
| mcd99 operating instructions | "brushless" speed controller and governor | 10 NOV 1997 | 200k |
| ---------> | BEC-speed controllers (with microprocessor) for brushed motors |
<------ | ------- |
| slims from 2001 supplement | slim-05/-10/-105He(k) heli supplement "slims from 2001" necessary | 11 OKT 2002 | 25k |
| slims from 2001 | slim series from 2001 complete instructions | 12 OKT 2002 | 160k |
| slims from 1999 supplement | software news of 1999 slim hardware "slims from 1999" necessary | 20 MAR 1999 | 15k |
| slims from 1999 | slim series from 1999 complete instructions | 11 AUG 1999 | 380k |
| slims up to 1998 | slim series up to 1998 | 08 OCT 1997 | 290k |
| mcd31 mcd43 mcf31 mcf43 | programmable speed controller series | 25 MAR 1998 | 100k |
| dart | mini speed controller with microprocessor for pylon racers and hotliners | 09 OCT 1997 | 310k |
| ---------> | Opto coupled speed controllers (with microprocessor) for brushed motors |
<------ | ------- |
| smart from 2005 | speed controller series with microprocessor V 10 - suited for Lithium batteries | 15 DEC 2004 | 370k |
| smart from 2001 | speed controller series with microprocessor | 10 OCT 2002 | 100k |
| smart to 2000 | universal speed controller series with microprocessor | 02 OCT 1997 | 310k |
| ---------> | BEC-speed controllers (without microprocessor) for brushed motors |
<------ | ------- |
| d21 f21 | mini speed controller series with BEC | 25 MAR 1996 | 50k |
| d31 f31 | speed controller series with BEC | 19 NOV 1996 | 60k |
| s10 | soft switch with BEC | 26 FEB 1997 | 60k |
| ---------> | Opto coupled speed controllers (without microprocessor) for brushed motors |
<------ | ------- |
| f43 (similar to d53) | power speed controller series with optocoupler | 09 FEB 1997 | 60k |
| ---------> | Speed controllers for cars and boats |
<------ | ------- |
| u-force | professional car-& boat-speed controller series for brushed- and brushless motors | 10 JUL 2005 | 520k |
| race | forward/reverse car & boat speed controller | 23 AUG 2005 | 550k |
| mcc-eagle+ | 1:8...1:12 profi car speed controller | 11 APR 2000 | 340k |
| ---------> | Speed regulators for helicopters |
<------ | ------- |
| mcr-servo | mcr-servo, engine-powered helicopter speed governor | 11 NOV 1997 | 140k |
| ---------> | Receiver voltage monitoring systems |
<------ | ------- |
| blinki | receiver-voltage monitoring item | 27 JUL 1998 | 35k |
| blinki-mc4 | microprocessor-controlled receiver-voltage monitoring item plus model finder | 09 JUL 2002 | 40k |
| blinki-mc3 | microprocessor-controlled receiver-voltage monitoring item plus model finder | 19 JAN 2000 | 50k |
| blinki-mc+ | microprocessor-controlled receiver-voltage monitoring item plus model finder | 08 MAY 1998 | 85k |
| blinki-mc | microprocessor-controlled receiver-voltage monitoring item plus model finder | 09 DEC 1997 | 25k |
| ---------> | More electronics |
<------ | ------- |
| LiPo/LiFeDiMATIC | LiPo/LiFe Discharge Monitoring And Throttle InteraCtion (from June 2008 and later) |
20 JAN 2009 |
240k |
| LiPoDiMATIC | LiPo Discharge Monitoring And Throttle InteraCtion (up to June 2008) |
19 JUL 2006 |
240k |
| LiPoRxII | LiPo Receiver Battery with a lot of Electronics for software-version V5 or higher |
15 NOV 2007 |
260k |
| LiPoRx | LiPo Receiver Battery with a lot of Electronics for software-versions V3 and V4 | 22 APR 2007 | 260k |
| LiPoRx | LiPo Receiver Battery with a lot of Electronics for software-versions V1 and V2 |
22 NOV 2006 |
270k |
| LiPoTx | LiPo Transmitter Battery with a lot of Electronics | 20 FEB 2008 |
25k |
| ---------> | Miscellaneous |
<------ | ------- |
| mounting instructions | for additional capacitors for future speed controllers | 17 MAY 2003 | 100k |
| aldis | future-u modification instructions for aldis connection | 19 SEP 2002 | 40k |
| battery maintenance | Useful information about the different types of batteries and maintenance | 22 NOV 2003 | 20k |
| Connectors | Recommended connector systems and mounting instructions | 05 NOV 2003 | 250k |
| HeliCalc | ServoTravel % <--> Rotor rpm mc18...mc24 <--> future-u | V 1.2 | 15k |