next-e.htm, updated: 21 MAR 2008
The high-tech multi-function chargers/dischargers with the unbelievable characteristics.
The schulze-chameleons of the next generation!
The symbiosis of innovation, performance, quality, precision and design.
The reference for battery chargers, dischargers and balancers.
Made in Germany – of course.
• Charges / discharges / maintains Lithium, Nickel and Lead batteries.
• Broad input voltage range 10-25V, "car" variant 10-15V.
• Dual-language menu: English / German. Default language English.
Second language (German) included in the set.
• More national languages can be downloaded from the Schulze website at no charge.
• Software updates and upgrades will be available on the Schulze website for downloading.
• Large graphic screen with white backlighting and 128 x 64 pixels.
• High-performance charging and discharging.
• Discharge processes on output 1 feed energy back into the car battery or into the
build in electronic load – in fact even with ONE cell.
• Integral ultra-precise Power Boost balancer.
• 8 or 12 voltage measurement inputs (depending on the type of charger) for monitoring individual cells in a battery.
• Wrong polarity protected power input and charging outputs.
• User-defined default settings for fast, simple operation.
EXTENSIONS
• Softwareversion 1.06 and higher:
Display of the single cell voltages in a pack when the pack is connected to one of the balancing/measuring connectors.
Also display of the difference voltages between each cell and the cell with the highest voltage.
Battery types
Ni-Cd, Ni-MH, Lead-acid, Lead-gel, Li-FePo4, Li-Ion, Li-Po
Interfaces
5V-SIO as a standard equipped in all variants of the nextGeneration series.
Accessory pack ("nextConn-Set")
Plug-in circuit board with USB interface, temperature sensor input, two switched outputs (for fan and flashing light), plus associated USB lead, temperature sensor, two leads with connectors fitted.
Available
The “melody module” is available (accessories).
This new series of battery chargers is based on suggestions from our customers as well as our own practical experience.
The unusual design fulfils the technical requirements extremely well.
The large 3” graphic screen offers 128 x 64 pixels and white screen backlighting, and provides good contrast for excellent legibility.
Depending on the menu selected, it is possible to display a simultaneous summary of up to thirteen parameters, or battery status plus a graphic display of the charge / discharge voltage.
The unit features nine buttons which make it very simple to select and operate the exact facilities you wish to use.
An integral balancer is available for Lithium battery packs, fitted with three different connector systems (Schulze BalCab 10 and 20, 1 x universal connector with 2.54 mm spacing).
The Lithium battery balancer incorporates the same proven Power Balancing technology used in the LiPoBal; this technique charges the weaker cells instead of discharging the fuller ones, which inevitably involves losses. Since energy is drawn from the car battery, this method shortens the overall charge time for a given charge current, compared with balancers based on the discharge technique.
Discharge processes feed energy back into the car battery – even with ONE cell.
If the charger is used with a mains PSU or a full car battery, the integral electronic discharge load is automatically activated; it is cooled when necessary by the temperature-controlled fan.
Since the unit operates at very high efficiency, the fan only cuts in when the converter is required to produce very high levels of power.
The unit is available in 10 variants.
| specifications |
View of the left side of "next 6.30-6" or "next 7.36-8"
View from the top "next 6.30-6"
View from the top and the left side of the "next 7.36-8"
Outputs of the standard nextConn module also visible
View from the top and the left side of the "next 10.36-12 (car)"
View from the top of the "next 10.36-12 (car)"
Additional keypad stickers for individualizing
your "next 10.36-8 car" (contain in the scope of supply)
- Screen-Shot -
Bright high-contrast display
with fine background structure and
with white background illumination.
The digits 1-8 in the "t"-axis are the balancing displays.
Cell 1 is shown invers. This cell is currently balanced.
Expandable nextConn module for next x.xx-xx eco:
Can be mounted simply in the next x.xx-xx
Universal connector system for all power supplies
The nextGeneration series can be used with
AC/DC power supplies or car batteries.
- Surcharge-requiring accessories for individualizing -
Design your own front sticker!
Shortly down loadable:
CorelDraw file with 4 different label designs.
These drafts can be modified of yours.
We will print them on our colour laser printer on
adhesive film and thereafter cut them out.
Copyright © 1996-2008 Schulze Elektronik GmbH. All trademarks shown are trademarks of their respective owners. All rights reserved.
http://www.schulze-elektronik-gmbh.com, designed by matthias schulze.