
u-force with EDRCS
(Easy Direct & Remote Controlled Setup)
U means universal, this means separate listed:
for brushed motors and
for brushless motors.
No noticable difference in the startup of 2- and 3-phase motors,
this means particularly brilliant also for those,
who will change the motor from brushed to brushless
without additional costs for the controller.
for cars and
for boats.
for pistol-radios and
for stick-transmitters.
robust speed controller for beginners and
reliable SuperHighPerformance speed controller for champions.
quick and easy configuration by DIL switch also suited for beginners and
configuration of all parameters by connecting a PC via a
special adaptor and windows-programm u-soft .
VirtualDrive-The selectable motor switching frequencies provides unbelievably fine control of speed and
braking.
forward and reverse driving (selectable) in brushless mode.
The u-soft allows configuring an additional proportional braking distance
also for the reverse gear.
SealTec-splash water protected. Therefore off-road qualified.
ANA-AutomaticNeutralAdjust - easy adjustment by self learning
neutral position or by PC-programm.
Additional common specifications:
AAF-AutoArmFunction (auto-on):
For competition use any of the limiters (current limiter, torque (softstart) limiter),
minimum throttle, minimum brake and maximum brake, neutral deadband are programmable.
The selectable motor switching frequencies provides also low current consumption,
whilst avoiding premature motor wear and overheating problems.
Advanced Low Power RISC-(ReducedInstructionSetCore)
microprozessor with 8 MIPS-MillionInstructionsPerSecond:
Drive motor acts as "loudspeaker" to confirm set-up and control functions.
Specifications:
The u-force arms itself automatically, i.e. is ready to drive, when the throttle
lever remains on the neutral position for at least 15 (valid and equal) neutral pulses.
At this position the controller learns also its neutral point unless the throttle stopp points
and end points are fixed (setted) by the u-soft programm.
(In this case, the controller also arms in any position of the proportional brake travel.)
The Auto-Arm function also prevents the motor bursting into life
if the transmitter throttle lever is left in a "motor running" position (either direction) when the
receiver is switched on (or after a shut-down due to overheating).
POST-PowerOnSelfTest:
The u-force refuses arming also when the "environment" (motor type, motor windings,
battery voltage, battery resistance, cable length and more...) does not allow a reliable
operation of the u-force. If possible the u-force beeps an errorcode.
You can set up minimum brake as an automatic brake and thereby save valuable split-seconds!
Brushed motor mode features a Turbo function for a lightning start! Another chance to gain a
valuable tenth of a second or two, and avoid the pile-up on the starting grid when otherwise
the controller setup is set to "current saving" mode.
In brushless motormode forward- and reverse running is available.
With our u-soft you can configure a proportional brake also for the reverse gear.
this means fully micro-processor controlled and monitored: temperature, low voltage,
excess voltage, validity of incoming receiver signals, e.t.c..
Very low losses because of most advanced FETs.
Power-On-Reset and Power-Off-Reset prevent unwanted bursts of
motor power when the battery is connected.
Brake light output.
Controllers can be programmed and programmed data selected & modified , using our
u-soft via adaptor cable and RS232 port of your PC.
PPS - PerfectPlugSystem - standard build in pp35 motor connector
sockets and pp35 motor plugs supplied
Type
[Unit]
Current
[A]-progr.
NiCd-
[Cells]
Size
[mm]Weight
[g]
Cable
[mm2]Throttle
[mOhm]
Switching
freq.[kHz]
Throttle*
[Type]
Brake
[mOhm]
Brake**
[Type]
BEC
[V/Apeak]
Umin-
Protect.
forw.-
revers
Usage
Comment
u-force
503-ph: 50/67A
2-ph: 100/200A 6-12 52*32*23 46-52 2,5
3-ph: 2*1.4
2-ph: 0.45 selectable propor-
tional &
program
-mable
3-ph: 2*1.4
2-ph: 0.45 propor-
tional &
program
-mable 5 V / 3 A 5 V
3-ph: f/r,
2-ph: forw.
Cars
Boats Brake light output, Gold plated plugs & sockets u-force
753-ph: 75/100A
2-ph: 150/300A 6-12 52*32*23 46-59 4,0
3-ph: 2*0.9
2-ph: 0.3 selectable propor-
tional &
program
-mable
3-ph: 2*0.9
2-ph: 0.3 propor-
tional &
program
-mable 5 V / 3 A 5 V
3-ph: f/r,
2-ph: forw.
Cars
Boats Brake light output, Gold plated plugs & sockets
u-force top view
|
u-force bottom view
|
| u-force with brushless motor click on the photo for a larger view
|
u-force & alpha receiver bottom view
|
| u-force with brushed motor click on the photo for a larger view
|
u-force bottom view
|
| "prog-adapt-uni" (5.3 accessories) RS232-adapter cable PC<---> u-force
|